Resinex website uses cookies and similar technologies to better understand which products are of your interest so we can personally provide you with more detailed information. By using Resinex website you agree to our use of cookies. Learn more about cookies and how to manage them

Sofprene® TPE-S (TPS)

Producer: Celanese
Polymer type TPE-S

Celanese TPE-S Sofprene® Tis a thermoplastic elastomer based on SBS (styrene-butadiene-styrene) that can be processed either by injection molding or extrusion. Sofprene® T TPS is also suitable for 2K molding with PP (standard grades) and PS (special grades).

General info

The Elastic characteristics of a thermoplastic elastomers like Sofprene® T tend to be reported as a key properties (unlike standard plastics). Therefore for the TPE families the most important general properties tend to be :

  • Hardness : measured in Shore A or Shore D.
  • Compression set : A value describing the elastic properties Sofprene® T TPS . Compression set measures the permanent deformation of the polymer under a specified load and Temperature for a measured time . The lower the percentage value , the better Sofprene® T TPS resists permanent deformation and is thus more elastic.
  • Density: Varies greatly grade by grade and thus significantly influences the final part price.

TPS (TPE-S) Sofprene® T offers a wide range of grades:

  • Hardness range from 25 Shore A to 40 Shore D
  • With low temperature limit down to -50°C
  • With max continuous temperature up to 60°C
  • High transparency grades
  • Density range from 0,90 g/cm3 up to 1,25 g/cm3

Main Sofprene® T TPS properties are:

  • High elastic recovery within at low as well as room temperature
  • Limited UV resistance
  • Excellent colorability
  • High thermal and electric insulation values
  • Good abrasion resistance
  • Specific rheology for each type of processing

Datasheets

Loading, please wait

Contact form